GPXtoGPS GPX to a Garmin route
Send a GPX track to a Garmin as a route it can navigate
A Garmin DriveSmart ignores GPX tracks and only navigates routes. Drop the GPX from your planner on GPXtoGPS and each track becomes a route: your named stops are announced, silent pins hold the GPS to your line, and the file goes to the Garmin over the USB cable.
By Rohan, who makes GPXtoGPS · checked 16 November 2026
Track or route: the difference
A track is a drawn line: thousands of points, no instructions. A route is a short list of places the GPS drives between, working out the roads itself. Komoot, Gaia GPS, Wikiloc and most other planners export tracks. A car Garmin wants a route.
Which way for your Garmin
The right way to get a GPX onto a Garmin depends on the kind of Garmin:
- A car navigator (DriveSmart, Drive, nüvi): it needs a route, so the track has to be turned into one. GPXtoGPS does that and sends it over the cable (the steps below). Garmin's own Drive phone app sends single places to the GPS, not a planned route.
- A handheld (Oregon, Montana, GPSMAP, eTrex): GPXtoGPS sends the route in parts and the track beside it (below). Garmin's free Explore phone app syncs courses and waypoints with many recent handhelds over Bluetooth.
- A watch (Forerunner, fēnix and others): a watch follows courses, not routes. Garmin Connect sends a course over Bluetooth; GPXtoGPS sends the GPX as a course over the cable, with no account (courses to a Garmin watch).
- An Edge cycling computer: Garmin Connect sends it courses. GPXtoGPS has not been tried with an Edge yet.
- A zūmo XT2 or a Tread: Garmin's Tread phone app plans routes, imports GPX files and syncs them to the navigator wirelessly. GPXtoGPS has not been tried with these yet (the models tried so far).
Sending a GPX file to a Garmin, step by step
- Quit Garmin Express and BaseCamp: only one program can hold the GPS at a time.
- Plug the Garmin into your Mac or PC with its USB cable, and open GPXtoGPS. The top of the window shows the GPS connected.
- Drop the GPX file from your planner on the window. Each track in it becomes a route under TO SEND.
- Look at the routes on the map, and rename them if you like.
- Press SEND. With a memory card in the GPS, "Send to" chooses where they go.
- Unplug the GPS: it imports the routes. On a DriveSmart, untick Unpaved Roads and U‑Turns under Settings → Navigation → Avoidances once, or it goes round gravel.
- Plug it in again to see them under ON THE GPS, checked against your line.
Copying the file by hand, and why it often fails
- A Garmin that shows up as a drive (older units and many handhelds) can take the GPX file copied into its GPX folder (on a handheld, Garmin/GPX) in Finder or File Explorer. Eject it before unplugging.
- Newer Garmins such as the DriveSmart 66 connect as a media device. On a Mac they do not show in Finder at all (why); on Windows, File Explorer shows them as a device.
- Either way the file goes as it is. A track stays a track, which a car Garmin ignores; there are no silent pins to hold the GPS to your line, and nothing checks what it made of the file.
What the app makes of a track
- The two ends become the start and the destination.
- Your named stops become stops the GPS announces.
- A silent pin about every 30 km, taken from the track itself so it sits on a road you chose, keeps the Garmin on your line without announcing anything.
- A file with several tracks (the days of a trip) becomes several routes. Preview them on the map, rename them, send.
After sending: was it understood?
Unplug the GPS and it imports the routes. Plug it in again and the ON THE GPS tab lists every route the Garmin holds, compared with the line you planned: on your line, close, or off it. If one strayed, the app offers a fix.
Handheld Garmins
Older handhelds keep every point of a route as a saved place and take at most 50 points per route. For them the app sends fewer pins, splits a long route into parts named "(1/2)", "(2/2)", and sends the track as well ("… track"), so the exact planned line can be followed on the screen.
If a handheld answers that there are no roads: it needs a map it can route on that covers both the route and where you are now, or its routing set to Off Road.
Garmin watches: a course
A watch follows courses rather than routes. With one plugged in, the same GPX goes to it as a course: the line itself, to follow on the watch, with no map and no stops. Courses to a Garmin watch.
Or plan it in the app
If you have the Garmin map on your computer, the trip planner plans along its roads and sends each day as a route, with no export in between.
Questions
Why does my Garmin DriveSmart not show the GPX file I copied to it?
A DriveSmart navigates routes, not tracks. Most planners export a track: a line of thousands of points with no instructions. The GPS imports the file and shows nothing to drive. The track has to become a route first: GPXtoGPS turns it into one.
Why is the route on the GPS different from the one I planned?
The GPS works out its own roads between the points of a route. GPXtoGPS adds a silent pin about every 30 km, taken from your line, to hold it there, and afterwards compares the GPS's version with yours. On a DriveSmart also untick Unpaved Roads and U‑Turns under Settings → Navigation → Avoidances, or it goes round gravel.
Which planners does it work with?
GPXtoGPS works with any planner that exports GPX: Komoot, Gaia GPS, Kurviger, Calimoto, MyRouteApp, Wikiloc, onX, Tracks4Africa, BaseCamp and others.
Does it work on handheld Garmins?
Yes. Handhelds such as the Oregon and Montana take at most 50 points per route, so GPXtoGPS sends a longer route in parts, "(1/2)" and "(2/2)", and sends the track itself too, to follow the exact line.